Edifier S3000 Pro

Edifier r1280db
Input sensitivity
Specifications R1280DB
Bluetooth versionV5.1
Audio codecsSBC
Power output (RMS)21W+21W
Frequency response55Hz-20kHz
Audio inputsLine In1, Line In2, Optical, Coaxial, Bluetooth
Line In1: 450±50mV;
Line In2: 550±50mV
Optical/Coaxial: 500±50mFFs
Bluetooth: 700±50mFFs
Signal-noise ratio≥85dB(A)
Noise level≤25dB(A)


  • Active bookshelf speaker system with 42W total power output
  • 1/2 inch (13mm) silk dome tweeter + 4 inch (116mm) mid-bass driver
  • Supports Bluetooth, Optical, Coaxial and Dual RCA inputs
  • Bass, treble and master volume dials located on the side panel
  • Wireless remote control for volume adjustment and mute
  • Calibrated, flared front-facing bass reflect port
  • 100% MDF wooden enclosures to minimize acoustic resonance
  • Universal 100V-240V power supply


Also Available Here


S3000 PRO FAQ:

A: Yes. you can connect to your TV via RCA cable or AUX cables. Please check your TV audio out port to see if it support these connectors.

A: Please check your speaker input mode. you can press the volume knob on the speaker to change mode. the LED indicator will change to represent current mode.

A: Press and hold the volume knob for approx. 8-10 seconds to clear Bluetooth Pairing. then you can pair with your phone/device.

A: Try change the battery and see if it works.

Recently Viewed

You haven't viewed at any of the products yet.

Buy Now

    Your Cart
    Your cart is emptyReturn to Shop