| Specifications: | Airpulse A300 Pro |
|---|---|
| Tweeter | Horn Loaded Ribbon Tweeter |
| Mid-Woofer | 6.5 inch Aluminum Cone Underhung Design Mid-Woofer |
| Amplifier System | Digital Amplifier With Xmos Processor |
| Power Output | L/R (Treble): 10W + 10W L/R (Woofer): 120W + 120W |
| Frequency Range | 40Hz-40KHz |
| Signal-Noise Ratio | L/R: ≥90dB(A) |
| Input Mode | AUX, USB, Optical, Coaxial, Bluetooth. Balance Input, Unbalance Input |
| Input Sensitivity | Balanced: 1100350mV, Unbalanced: AUX: 700350mV USB: 550350mFFs Optical: 500350mFFs Coaxial: 500350mFFs, Bluetooth: 500350mFFs |
| Main Voltage | 100-240 V AC/50-60 Hz |
| Cabinet Size | 225(W) x 385(H) x 350(D) mm |
| Net Weight | 25.6Kg (56.6 lbs) |
| Gross Weight | 29.4Kg (65 lbs) |
RM7,499.00
Out of stock
Out of stock
Also Available Here
Share
A: Disable “absolute volume” from your smartphones to solve this issue
1. Unpair your bluetooth speaker first.
2. Go to Settings.
3. Select “Additional Settings”
4. Select “Developer options”
5. Find and check on the “Disable absolute volume”
6. Restart your phone and try connect again
A: Please check your input mode. you can switch the input mode via your remote control or press the volume knob at the back of the speaker.
A: Make sure there is no other device connected to the speaker's Bluetooth. If someone has connected it you can press and hold the volum knob for 6 seconds to clear the bluetooth cache and disconnect from the device.
Recently Viewed
Buy Now
Copyright © 2022 Edifier Malaysia All rights reserved.
